Our Location:

Dentist - Andover
2 Elm Square, Suite 202,
Andover, MA 01810
 

Find answers and other helpful dental topics in our digital library.

Our Blog:

Archive:

Tags

By Browell & Murphy
January 18, 2016
Category: Dental Procedures
AdvancesinPorcelainVeneersImproveBothStrengthandAppearance

One of the best restorative options for slightly deformed, misaligned or stained teeth is a porcelain veneer. Composed of thin, laminated layers of dental material, the veneer is bonded to the outside of the tooth to transform both its shape and color to blend with other natural teeth.

Veneers are more than a technical process — they’re works of art produced by skilled artisans known as dental lab technicians. They use their skills to shape veneers into forms so life-like they can’t be distinguished from other teeth.

How technicians produce veneers depends on the material used. The mainstay for many years was feldspathic porcelain, a powdered material mixed with water to form a paste, which technicians use to build up layers on top of each other. After curing or “firing” in an oven, the finished veneer can mimic both the color variations and translucency of natural teeth.

Although still in use today, feldspathic porcelain does have limitations. It has a tendency to shrink during firing, and because it’s built up in layers it’s not as strong and shatter-resistant as a single composed piece. To address these weaknesses, a different type of veneer material reinforced with leucite came into use in the 1990s. Adding this mineral to the ceramic base, the core of the veneer could be formed into one piece by pressing the heated material into a mold. But while increasing its strength, early leucite veneers were thicker than traditional porcelain and only worked where extra space allowed for them.

This has led to the newest and most advanced form that uses a stronger type of glass ceramic called lithium disilicate. These easily fabricated veneers can be pressed down to a thickness of three tenths of a millimeter, much thinner than leucite veneers with twice the strength.  And like leucite, lithium disilicate can be milled to increase the accuracy of the fit. It’s also possible to add a layer of feldspathic porcelain to enhance their appearance.

The science — and artistry — of porcelain veneers has come a long way over the last three decades. With more durable, pliable materials, you can have veneers that with proper care could continue to provide you an attractive smile for decades to come.

If you would like more information on dental veneers, please contact us to schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Porcelain Veneers.”

0 Comment(s) Permalink

Comments: